5 Stage Management Wastewater Treatment | Waste Solution

Management wastewater treatment aims to make the whole process of processing for the better. This process involves an element of mechanical, chemical, biological and human, all of which must meet the appropriate standard order processing system can run effectively and reliably.

If there is a discrepancy in one of these elements, then the process can be inefficient processing and cost of care. In the worst conditions, processing may fail completely and leads to not satisfy the permit environmental or water conditions that are of poor quality. This then gives a negative impact on your production process.

Increasing waste disposal costs from year to year. The higher the levels of contamination found in the effluent, wastewater treatment fees You will be higher. Based on these conditions, the effort cost savings can be made by considering three main focus as follows:

Reduce cost/m³ of your processed wastewater disposal
Reduce the volume of mud flowing from the site/your factory
Do recycling on wastewater (effluent) that has been processed

The First Stage

Management of the evaluation of process parameters and external factors that influence the course of the process. Some of these parameters is, but is not limited to:

The process of the formation of wastewater
Chemicals contained in sewage treatment process
Raw water source
Chemical and physical water quality, as well as wastewater characteristics
The rate of flow and the incoming wastewater charges
The highest level of the charge and the potential occurrence of disturbance
Variability, both events that are normal or not
The quality of clean water or wastewater ideal processed

The Second Stage

Management about the assessment of the types of processing (e.g. physical/chemical processes, biological, mechanical, electrochemical, membrane technology, etc.)

The design and capacity of the equipment
The condition of the equipment
Operation and maintenance procedures
The eligibility process and equipment

The Third Stage

Management of the evaluation process control, instrumentation, and monitoring tools to ensure the correctness of the information provided and/or the right control functionality including:

Keep an eye on the right parameters according to the type of the location.
Using the right types of tests to measure parameters
Collect the sample testing precisely in each location
Collect and evaluate the data lab effectively
Record the results of physical and visual surveillance to be used in the evaluation of the feasibility of the process.
Save the data as a historical evaluation in the future
Use the appropriate control processes in order to obtain the desired process settings
Using this type of instrumentation is the right tool in accordance with the location of the sewage treatment process
Do the correct adjustments based on data that is worth

The Fourth Stage

Management about use of your chemicals by ensuring that:

The right chemicals are only used in accordance with needs of
Measure the exact chemicals obtained through the use of the test (e.g. test of coagulant dosage (jar test), titration)
Conditions of usage have been appropriate (e.g. levels of pH, alkalinity, temperature)
The chemical has been prepared properly (e.g. polymer floculant)
Chemicals are mixed and dissolved effectively

The Fifth Stage

Management of the knowledge of the operator to ensure that your staff has to understand the processes that are required for optimal system operation. Assessment of operators include the following:

Basics of chemistry
Principles processing in waste treatment installation
Processing parameters and the method of his
The level of achievement of the targets for controlling parameters along the way to his customisation
Effect of variability in processing
Laboratory test and monitoring physical/visual
On-line control
The response to disturbance

Hopefully the explanation above can be useful, happy reading in my website.